Reactance and Impedance

Reactance and Impedance

Looking for other study material? arrow

What is Reactance?

Reactance is essentially the inertia against the motion of electrons in an electrical circuit i.e. the attribute against the flow of electrons in an electrical circuit. It is denoted by the symbol R and is measured in units of the Greek symbol ohm. In an electrical circuit, it is mathematically the ratio of the potential difference V and the current flows between two points in that circuit.

R = VI

It is also known as the imaginary resistance of an electrical circuit. The motion of electrons constitutes the current generation in an electrical circuit and any inertia against this motion of electrons constitutes reactance. It is primarily generated due to the elements inductance or capacitance. In a magnetic field, it resists the change in the current of the element, whereas in an electric field it resists the change in voltage of the element. It is mathematically represented by the letter X and has its unit of measurement in the form of the Greek symbol ohm.

Types of Reactance

There are two primary types of reactance:

  • Capacitive reactance (Ohms is the unit)
  • Inductive reactance (Ohms is the unit)

Capacitive Reactance

When a capacitor is connected to a circuit with AC supply, there is no simultaneous change in the capacitor voltage and capacitor current. The potential difference across the capacitor is dependent on the AC power supply. Below is the graph illustrating the change in current and potential difference. The current is maximum when the potential difference is at zero.

The capacitive reactance for a capacitor with capacitance C connected in the circuit along with AC power supply is given as:

\(\begin{array}{l}X_{C}=\frac{1}{2\pi fC}\end{array} \)

Where,

  • Xis the capacitive reactance
  • f is the frequency of AC power supply
  • C is the capacitance

Inductive Reactance

In inductive reactance, the current across an inductor changes when potential difference develops across it. The potential difference and rate of change of current are proportional to each other.

The inductive reactance for an inductor with inductance L connected in the circuit along with AC power supply is given as:

XL = 2πfL

Where,

  • XL is the inductive reactance
  • L is the inductance of the inductor
  • f is the frequency of the alternating current

What is the difference between Reactance and Resistance?

Parameter Resistance Reactance
Variation of current Resistance is a property of an electrical component which opposes the flow of current Reactance is a property of an electrical component which opposes the change in current
Power dissipation Resistance leads to power dissipation Reactance does not lead to power dissipation
Denoted by Resistance is denoted by R Reactance is denoted by X

What is Impedance?

Impedance is a combination of resistance and reactance. It is essentially anything and everything that obstructs the flow of electrons within an electrical circuit. Hence, it affects the generation of current through the electrical circuit. It is present in all the possible components of the circuit and across all possible electrical circuits. Impedance is mathematically symbolized by the letter Z and has its unit as ohm. It is a superset of both resistance and reactance combined.

In phasor terms, impedance Z is represented as a combination of resistance R and reactance X as:

X = R + j X

Where reactance X is a combination of Inductive  XL and capacitive Xc

X = XL + Xc

Wattless Current

The component of the AC current that consumes zero power in a circuit is known as a wattless current. The average power dissipated in a AC circuit is given by the equation

P=VI cos ϕ

From this equation, we know that the average power dissipated not only depends on voltage and current but also on the cosine of the phase angle between them. In a circuit that contains only a capacitor or inductor, the phase difference between the voltage and current is π/2. Therefore, cosϕ becomes zero, and the power dissipated will be zero. There will be no power dissipation in spite of the current flowing in the circuit. This current which results in no power dissipation is referred to as wattless current.

Stay tuned with BYJU’S to learn more about Reactance, Impedance, and much more.

Test your Knowledge on Reactance and Impedance

Comments

Leave a Comment

Your Mobile number and Email id will not be published.

*

*